You are here

Conference Agenda


Monday, October 22nd, 2018
Begin End Pfahl Hall Second Floor Room 240 Location
14:00 16:00 Registration

Pfahl 240

16:00 19:00 Advisory Board Meeting Pfahl 240
19:00 21:00 Welcome Reception Pfahl 2nd Floor Foyer



Tuesday, October 23rd, 2018
Begin End Room: Pfahl 140 Room: Pfahl 230 Room: Pfahl 240 Room: Pfahl 202
9:00 10:00

Joint Session

• Regulation
• Opening Address: Chairman
• Welcome Address: Chairman
• Instruction of Schedule
• AB agenda: SG Chairmen
• Self introduction: Guests

                                      Coffee Break
10:30 12:30

Process Simulation
[A. Ghiotti, Y. Yoshida]
- Analytical Approach for Punch Eccentricity in Backward Cup Extrusion, Prof. Ishikawa (Chubu Univ.)
- Prediction of Product Properties in Cold Forging Considering the Bauschinger Effect, Mr. Felix Kolpak (TU Dortmund)
- Mechanical Joining Simulation by Nicolas Poulain (Transvalor)
- Round Robin Test Actvity

Tool Life & Tool Quality
 [V. Krusic, S.-Y. Kim]
-Tool design and optimization based on production results, by Klaus Truetsch, Arnold Umformtechnik GmbH &Co. KG
- Die Technology for Precision Forging, by
 Eisuke Murai, Nichidai Corporation

[P. Groch, K. Kitamura]

- GALLING GROWTH BEHAVIOR IN HOT FORGING, Kuniaki Dohda, Masahito Yamamoto, Laurent Dubar, Houichi Kitano


Advanced Precision Forging
[C. Karadogan]

-Precision Bulk Metal Forming using Servo Mechanical Press Technology, C. Karadogan
-Innovative material flow strategies for efficient filling of teeth forms by cold forging, by M. Liewald, C. Karadogan, et al

14:00 16:00 Workshop: Future of Cold Forging  
14:00 14:30 Numerical Research of Sheet Bulk Metal Forming Using a Forward and a Lateral Extrusion Process Florian Pilz (FAU)
14:30 15:00 Cyber Phisical System for Forging Processes Dr. Shin-ichiro Fujikawa (NISSAN)
15:00 15:20 Workflow for Fastening Solution Nicolas Poulain (Miguel Altuna Institutua and Transvalor)
15:20 15:40 Process Presentation of Combined Deep Drawing and Cold Forging Oliver Napierala (TU Dortmund)
15:40 16:00 A Proposed Common Single-Die Exchange Technique for Minimizing the Number of Installations in a Cold Forging Process of Pulleys Yingyot Aue-u-lan (Sirindhon)
                                      Coffee Break
16:30 17:30 Joint Session
                                 Conference Dinner



Wednesday, October 24th, 2018
Begin End Room: Pfahl Hall Speaker
8:30 9:15 Rapid thermal and mechanical processing of steels: opportunities and challenges Prof. Kiester Clarke 
(Colorado School of Mines, U.S.)
9:15 10:00 Mechanics and structures at the mesoscale: challenges and opportunities for ICME Prof. Steve Niezgoda
(Ohio State University, U.S.)
                                           Coffee Break
10:30 11:15 Applications of Process Simulation in Coin Minting James Miller
11:15 12:00

Emerging Applications of Additive Manufacturing in the Automotive Sector

Dr Ryan Hahnlen

12:00 12:45 The Innovation Hub for Smart Mold Processing Prof. Zhigang Wang
(Gifu University, Japan)
14:00 15:00 Plenary Meeting Masahito Yamanaka
(ICFG Chairman) 
15:00 15:30 Paper Prize Session
                                           Coffee Break
                                  Plenary Paper Session
15:50 16:10 Effect of Measuring Method of Work Hardening Curve on the Accuracy of Forming Limit Analysis Dr. Tomoyuki Hakoyama
(Gifu University)
16:10 16:30 Optimization of a Cold Forged Component through Combined Operations Dr. Mikel Atxega
16:30 16:50 A loading-path-independent fracture model for predicting ductile fracture initiation under variable path loadings Xincun Zhuang
(Shanghai Jiaotong University)
16:50 17:10 Influence of Damage on the Properties of Cold Forged Parts Oliver Hering
(TU Dortmund)
17:10 17:30 Application of Pulsed Ram Motion Control to Lubrication in Hot/Warm Forging Process Prof. Ryo Matsmoto
(Osaka University, Japan)
                                           Dinner Break



Thursday, October 25th, 2018
Begin End Tour A: Tour B:
9:00 10:00 Transport Transport
10:00 12:00

- Electron Microscopy and Analysis

- Center for Design and Manufacturing Excellence

- Center for Design and Manufacturing Excellence

- Electron Microscopy and Analysis

12:00 13:30                            Lunch
13:30 14:30 Transport Transport
14:30 16:30

- Center for Automotive Research

- Edison Joining Technology Center

- Edison Joining Technology Center

- Center for Automotive Research

16:30 17:30 Back to OSU Back to OSU